Saznajte više o Limundo zaštiti
Feature:
The SATA port power supply hub supports free stepless speed change.
Please note that a single channel does not support fans larger than 1A, and is not suitable for violent fans with high power and high speed.
The speed controller does not have a fan extension cable and a SATA extension cable connected to the power supply. The fan can be directly connected to the speed controller. Please connect the SATA interface to the power supply line.
The 3pin/4pin fan can be adjusted at the same time.
Specification:
Product Name: Manual Chassis Fan Speed Controller
Voltage regulation range: 0V-12V
Fans that can be connected: 7 fans
Upper limit power: 72W (theoretical value)
Adjustment method: Manual knob adjustment
Installation position: PCI position of the chassis
Power supply interface: SATA
Can support: Small 3pin/large 4pin fan
Product weight: 50g
Product size: 125x48mm
About installation:
The screw to fix the PCI position is included in the package. Please fix the speed controller to the PCI position when installing.
The principle of knob adjustment is to adjust the input voltage. Some fans support 7V voltage start, and some can only start at 12V, so some fans will have a virtual position when adjusting (similar to rotating a fan speed without responding or not rotating) , This is a normal phenomenon, not a product quality problem, please pay special attention.
Nije moguce licno preuzimanje.
Kupljeni predmet se isporucuje:
Post Express-om do 0.5kg, danas za sutra
pouzecem 350.00 dinara
uplata na ziro racun pre slanja 300.00 dinara
Slanje na paketomat Poste
Paketom poste, slanje narednog dana, rok isporuke do 5 dana
uplata na ziro racun pre slanja 200.00 dinara
Preporucenim pismom sa pracenjem
uplata na ziro racun pre slanja 140.00 dinara
Robu saljem na adresu koja stoji u podacima sem ako kupac drugacije ne naznaci porukom ili napomenom pri kupovini.
U slucaju da se roba vrati zbog nepotpune ili nepostojece adrese ide negativna ocena.